Hide message

Cookies on the Nikon Metrology website
We use cookies to ensure we give you the best experience on our website. If you continue we'll assume
that you are happy to receive all cookies on the Nikon Metrology website.
Find out more about our cookie policy

Nikon Metrology NV | Europe
Change location
 
 
 
Request info
 
 

SMZ1270i - Expanded zoom range, remarkable image sharpness, and intelligent image acquisition features

nikon metrology industrial microscopes stereo SMZ1270iTo meet and exceed the needs to observe minute structures while covering a wide field of view in the biological fields where biological body screening, injection and observation are conducted every day, the SMZ1270i was developed to feature expanded zoom ratio, high operability, intelligent image acquisition features and excellent optical performance.

Applications

  • Metallurgy, Metal manufacturing
  • Cast iron nodularity and flake analysis, Grain sizing
  • Cracks and Failure Analysis
  • Surface examination
  • Composites, Fabrics/Textiles, Asbestos
  • Antennae, Telescope optics
  • Optoelectronics
  • Microelectronics, MEMS,
  • Telecom & electronics
  • Mobile phones, shavers & watches
  • Implants/ Protheses
  • Manual examination
 
Benefits & features
 

Best-in-class zoom ratio

With a best-in-class zoom ratio of 12.7x (0.63x-8x), the SMZ1270i covers an even greater magnification range than previous models. At the lowest magnification, the actual field of view will go up to 35mm*, allowing easy observation of an entire 35mm petri dish.
* when 1x objective and 10x eyepieces are used (excluding Coaxial EPI illumination)

nikon metrology industrial microscopes stereo zoom SMZ1270


High quality images

Amazingly clear and bright images with reduced chromatic aberrations can be acquired throughout the extended zoom range through the newly developed “Plan Apo WF” and “ED plan WF” objectives.

nikon metrology industrial microscopes stereo optics SMZ


nikon metrology industrial microscopes stereo objectives SMZNew objectives optimized for widefield observation at low magnification

In combination with the newly developed WF series objectives, the SMZ1270i offers a wide and uniformly bright viewfield even at low magnifications. In addition, a 0.75x objective is now available, expanding the lineup of low magnification objectives.


nikon metrology industrial microscopes stereo versatile double nosepiece SMZ

Versatile double nosepiece

The double nosepiece allows for seamless observation in a wide range of magnifications. In addition, changing objectives has never been easier.

By changing the nosepiece from stereo-position (stereo view) to mono-position (on-axis view), you can easily acquire images suited for measuring and processing.


nikon metrology industrial microscopes stereo observation posture SMZImproved ergonomics

There are several eyepiece tubes to fit various configurations, from a simple setup to a system with some intermediate modules or digital cameras. With an ergonomic eyepiece tube, the observation angle can be adjusted from 0-30 degrees, allowing for comfortable observation postures even if combined with intermediate modules like illuminators or teaching heads.  Furthermore, the Plain Stands and Diascopic LED Stands adapted a slim design for easier operation and exchange of specimens and samples.


Advanced digital imaging capabilities

In combination with the DS-L3 Camera Control Unit, NIS-Elements imaging software, and P-RN2 Intelligent Nosepiece, image acquisition is now more efficient, with the objective magnification and zoom ratio information displayed on the monitor.

nikon metrology industrial microscopes stereo digital imaging capabilities SMZ1270i


Expandable with a wide range of accessories

To support a variety of observation methods and applications used for research and inspection, an assortment of accessories, such as illumination units, stands, and eyepiece tubes, are available. By incorporating a “Fly Eye Lens” with the Epi-Fluorescence illuminator, uniform brightness over the entire field of view is realized, which helps in observing specimen that needs a wide magnification range. Nikon also offers several digital cameras ideally suited different stereo microscope applications.

Diascopic illumination stands have been renewed. The slim LED base design provides easy access to specimen and easy operation. As with the SMZ25 and SMZ18, the diascopic illumination base features Nikon’s very own oblique illumination, the OCC illuminator. The built-in feature offers high contrast observation for transparent samples such as oocytes used in the IVF application.

nikon metrology industrial microscopes stereo accessories SMZ

 
Specifications

Optical system  

  Parallel-optics type (zooming type)  

  Zoom ratio  

  12.7:1  

  Zoom range  

  0.63 – 8x (0.63/1/2/3/4/6/8x stops)  

  Total magnification  

  3.15 – 480x (depending on eyepiece and objectives) (with coaxial episcopic illuminator: 15 – 540x)  

  Tubes  

  Eyepiece inclination: 20° (P-B Binocular Tube) / 15° (P-TL100 Trinocular Tube) / 0°-30° (P-TERG100 Trinocular Tilting Tube, P-TERG50 Trinocular Tilting Tube)  

  Eyepieces  

  C-W10xB (F.N. 22), C-W15x (F.N. 16), C-W20x (F.N. 12.5), C-W30x (F.N. 7)  

  Objectives  

  Plan Apo 0.5x/WF, Plan Apo 0.75x/WF, Plan Apo 1x/WF, ED Plan 1.5x/WF, ED Plan 2x/WF  

Working distance  

  70mm(with Plan Apo 1x/WF)  

Weight (approx.)  

  11.9 kg (with P-TERG100 Trinocular Tilting Tube + P-DSL32 LED Diascopic Illumination Stand)

 
Brochures
Industrial Instruments General Catalogue
Industrial Instruments General Catalogue

en de

Overview brochure
Overview brochure

en fr de

Stereo Microscopes
Stereo Microscopes

en

 
Industrial applications
 
 

Brochures

Industrial Instruments General Catalogue
Industrial Instruments General Catalogue

en de

Overview brochure
Overview brochure

en fr de

Stereo Microscopes
Stereo Microscopes

en