Hide message

Cookies on the Nikon Metrology website
We use cookies to ensure we give you the best experience on our website. If you continue we'll assume
that you are happy to receive all cookies on the Nikon Metrology website.
Find out more about our cookie policy

Nikon Metrology NV | Europe
Change location
Change location
America's
Europe
& Rest of the world
 
 
 
Request info
 
 

Eclipse LV-DAF - The perfect upright microscope with an auto-focus system solution for Eclipse LV microscopes and OEM applications.

nikon metrology industrial microscopes upright Eclipse LV DAFThe LV-DAF delivers fast, versatile autofocus with the Hybrid Auto-Focus system, making the most of two types of auto focus systems. Combining slit projection and contrast detection auto focus, it features large focus range and fast tracking ability. A variety of observation methods are supported, including brightfield, darkfield and differential interference contrast (DIC), as well as various transparent samples.

Applications

  • Antennae
  • Telecom & Electronics
  • Telescope optics
  • Mobile phones, shavers & watches
 
Benefits & features
 

Hybrid Auto-Focus

There are two common types of auto-focus systems for microscopes: slit projection and contrast detection.

Slit projection system projects a slit image and then detects the shift in the reflected light. This system is useful when a large focal range is necessary.
Contrast detection system projects a slit pattern and then detects the contrast of the reflected light. This system is useful when focus accuracy is needed. This is possible because this auto-focus system is less affected by sample surface variation.

Hybrid Auto-Focus combines the advantages of both systems and makes the most of their paired potential.

nikon metrology industrial microscopes upright hybrid diag Eclipse LV DAF


Design

The controller features the same hardware design as the LV-ECON and has a compact footprint that allows them to be stacked on each other and used anywhere.


Compatibility with LV Series Microscopes

The LV-DAF can be combined with other LV series products. When combined with the LV-ECON, it enables observation under the optimal conditions for each particular sample.


Software Development Kit

Nikon provides a software development kit (SDK) for integrating the LV-DAF into a variety of systems. (Compatibility is only guaranteed for Nikon products.)


Control

The LV-DAF can be controlled from a PC or a DS-L2 digital camera system for microscopes via USB or RS232C.


Auto-Adjustment Program

The Auto-Adjustment Program, included as standard, enables simple and speedy system setup. The program performs immediate auto-adjustment after the user focuses the system and presses the button to start the setup. It is also possible to automatically set/register optimal parameters for each type of sample and recall them in accordance to the sample being photographed.


LED Light Source

The LV-DAF uses a bright LED for the auto-focus light source. And since it also automatically adjusts the auto-focus light volume for the sample, it can support samples ranging from low to high reflectivity.


Multiple Observation Methods

A wide range of observation methods is supported, including brightfield, darkfield, and DIC. Reflective samples and transparent samples are also supported.


Large Focal Range

Focal range is remarkably larger than with contrast detection alone. This means that samples with distortions on their surface, such as a liquid crystal substrate, can be rapidly tracked, thereby enabling speedy focusing.

 
Specifications
Detection system: Hybrid system combining slit projection with contrast detection
Auto-focus light source: Near-IR LED (λ = 770 nm)
Objective lens: CFI60 objective lens 2.5x-100x (includes extra-long working distance (ELWD), super-long working distance (SLWD), and CR for LCD substrate inspection)
Auto-focus modes: Continuous mode and search mode (single, continuous)
Focal range: Focal range without searching (brightfield)²
2.5x: 5.5 mm or more, 5x: 4.5 mm or more, 10x: 1.3 mm or more, 20x: 320 μm or more, 50x: 50 μm or more, 100x: 10 μm or more
Focal time: 0.7 seconds or less (20x: 200μm with no search)² ³
Focal precision (repeated reproducibility): 1/2 or less of focal depth² ³
AF offset feature: Enables observation with precise adjustment of focal position while applying auto-focus
Minimum driveresolution: 0.05 μm¹
External communication: RS232C, USB, and parallel I/O
Power source: 100-240 V AC, 1.0 A, 50/60 Hz

 

¹ Some limitations for 2.5x and 100x.
² Using Nikon’s standard Cr vapor deposition sample.
³ Using the LV-IMA or LV-FMA

 

Compensator: Standard 1/4 wave and tint plate: Quartz wedge or Senarmont compensator can be inserted into intermediate slot
 
Brochures
Industrial Instruments General Catalogue
Industrial Instruments General Catalogue

en de es

Overview brochure
Overview brochure
LV-DAF
LV-DAF

en

 
Case studies
Automated nikon photo-microscope supports world-leading rock analysis
Automated nikon photo-microscope supports world-leading rock analysis
Founded in 1997, Conwy Valley Systems in North Wales has become a global leader in the supply of computerized photo-microscopy systems for inspection, statistical analysis and classification of rock samples to assist oil and gas exploration.

en de

 
 

Brochures

Industrial Instruments General Catalogue
Industrial Instruments General Catalogue

en de es

Overview brochure
Overview brochure
LV-DAF
LV-DAF

en

Case studies

Automated nikon photo-microscope supports world-leading rock analysis
Automated nikon photo-microscope supports world-leading rock analysis

en de