XT H 225 ST 2x
Productivity without compromise

For many years, X-ray CT (computed tomography) has been used in laboratories for inspecting the interior of samples such as fossils and artifacts. More recently, this valuable technology has been finding its way into the manufacturing environment for quality control applications. It is able to non-destructively detect voids, burrs, cracks and other imperfections inside components and assemblies, including those that have been additively manufactured. It also serves as a metrology tool to ensure dimensional compliance, both internally and externally, to a high degree of accuracy.

However, manufacturers are no longer only finding failures in a manufacturing process. The usefulness of CT goes even further on the factory floor by allowing a production line to be adjusted continuously in real-time to prevent components falling out of tolerance. By combining unique hardware with innovative software, the XT H 225 ST 2x delivers the efficiency, reliability and accuracy required for these production applications. Throughout the entire time to market of a user’s new product, all steps from R&D through production line setup and pre-series trial runs to full production are supported.

 

 


Product overview

The integration of industry-leading features into the XT H 225 ST 2x microfocus X-ray CT system allows a doubling of data acquisition speed and hence of inspection productivity. It is a result of using advanced detector technology combined with new functionality including Half.Turn CT and Rotating.Target 2.0.

225kv-ct-inspection-and-metrology
ROTATING.TARGET 2.0
225kv-ct-inspection-and-metrology
HALF.TURN CT, FASTER CT ACQUISITION
225kv-ct-inspection-and-metrology
SMART.FILAMENT, DOUBLED FILAMENT LIFETIME


Benefits & features


nikon metrology xth225st2x halfturn

Half.Turn CT, faster CT acquisition

Instead of rotating the sample under investigation through 360 degrees while the X-rays directed at it are either absorbed or pass through to the detector, Nikon Metrology has devised a method that allows sufficient data to be obtained by rotating the sample through just over 180 degrees.

Complete in-house control over the development of world-leading reconstruction software has facilitated the Half.Turn CT breakthrough, as it enabled the introduction of novel automatic center of rotation calculation coupled with optimization of the reconstruction algorithm. Together they eliminate artifacts introduced by rotating a sample through less than 360 degrees. As a consequence, an image is produced automatically without loss of quality or accuracy from about half of the data usually acquired with conventional CT.

 



nikon metrology x ray sources graph1Unique rotating target

Nikon Metrology is the only company in the world to supply X-ray CT systems with a rotating target technology. Other products on the market, which use heat-absorbing materials, require cool-down periods and may have power limitations, but the unique 225kV rotating target allows continuous operation across its entire power range up to 450W for superior inspection productivity.

The liquid-cooled, rotating target technology adds further capabilities for power, resolution and reduction of scan time. It efficiently disperses the heat generated as the electron beam hits the surface to generate X-ray photons, boosting the flux by up to 5-times, enabling up to 3 times higher resolution for the same power, or allowing data to be collected 3-5x faster for the same resolution.

 

 

 



nikon metrology xth225st2x smartfilamentAuto.Filament Control and Quick.Change

High-resolution microfocus X-rays start with electrons emitted from a thin filament that has to be replaced periodically. Less frequent changing of the filament is desirable, as it means that system availability is higher. Long-life filaments are available but they are thicker, so the high resolution nature of the microfocus X-rays is lost. With the XT H 225 ST 2x, the user no longer has to choose between high-resolution and long-life filaments.

Auto.Filament Control intelligently controls the X-ray source to double the lifetime of the filament and increase system availability. Nikon Metrology is able to implement these algorithms as its sources are designed and manufactured in-house, providing the ability and expertise to control the source in such a way that operational life is increased.

When the filament does have to be replaced, downtime is considerably lowered by the introduction of Quick.Change plug-and-play filament cups. This convenient, highly repeatable procedure eliminates human error. In addition, the filaments themselves have been aligned and conditioned by Nikon Metrology’s X-ray engineers to deliver optimal performance.

 



nikon metrology xth225st2x localcalibrationLocal.Calibration, high accuracy CT measurements

Local.Calibration allows fast, automated calibration of voxel size at any CT scan position, rather than the user having to perform the function manually. It leads to a radical improvement in measurement accuracy for metrology applications. Further benefits are that the procedure is deskilled and dimensional accuracy is traceable. As the CT scan position is calibrated with reference to a known artifact, measurements can be made with a high level of confidence.

 



nikon metrology x ray xth225 x raysourceforeveryapplication

X-ray source for every application

At the heart of Nikon Metrology’s superior image quality is world-leading X-ray source technology. Where competitor models require dual-tube configurations for flexibility, the design of Nikon’s unique in-house X-ray source in the XT H 225 ST 2x allows up to 4 target heads to fit onto the same X-ray tube base, resulting in unique flexibility and performance from just a single tube.

The easily interchangeable X-ray targets allow optimization for a wide range of samples, offering a transmission target with sub-micron feature recognition, through the 225kV reflection target (with unique multi-metal target option), to the world's only rotating target design for outstanding performance.

 



nikon metrology x ray xth225 semi automated CT 5Automation and integration

The XT H series provides automation modes to maximize CT productivity. Automated production workflows are fully customizable, with automated scanning, reconstruction and data analysis. In-house CT Pro software offers world-leading reconstruction times performed by Nikon Metrology’s expertly configured, high-performance computer specifications, with image enhancement and artefact removal options included as standard.

With full control through IPC communication, the XT H series can be configured with auto-loaders and robot retrofit for full automation and seamless integration into a production line. After providing superior image quality and leading reconstruction times, customizable analysis tools are available with data output compatible with both in-house and all industry-leading third-party software for automating sample-specific analysis.

 



 

Brochures

 

Enter your data and request more information






Stay informed

Nikon Metrology collects your data so that we can process your request and email you with information on products and services we think you might like including information about products and events.


Submit