Neuigkeiten

02-06-2021

Erweitterung Der Neuen „NEXIV“ Videomesssystem „VMZ-S“-SERIE

Erweitterung Der Neuen „NEXIV“ Videomesssystem „VMZ-S“-SERIE

Zwei neue Modelle ergänzen die aktuelle „NEXIV VMZ-S“-Serie, der für automatische Dimensionsmessaufgaben bestimmten CNC-Videomesssysteme von Nikon Metrology. 

 
28-05-2021

Fragen Sie unsere Experten – Die NEXIV Ausgabe

Fragen Sie unsere Experten – Die NEXIV Ausgabe

Die NEXIV-Serie von Nikon bietet eine breite Produktpalette von Einsteiger-Bench-Top bis hin zu übergroßen Top-Level-Systemen. Entwickelt, um anspruchsvolle Fertigungsanforderungen mit automatisierten Messungen von mechanischen Teilen, elektronischen Geräten, Werkzeugen & Formen und medizinischen Geräten zu erfüllen.

Wir sprachen mit unserem Nikon NEXIV-Experten Ulrich Beck über seine Erfahrung in der Arbeit mit der NEXIV-Serie seit über 20 Jahren.

 
26-05-2021

Die zerstörungsfreie Inspektion von großen Bauteilen eine Stufe höher gebracht

Die zerstörungsfreie Inspektion von großen Bauteilen eine Stufe höher gebracht

Fortentwicklung der industriellen Mikrofokus-Röntgen-CT-Inspektionslösungen von Nikon Metrology durch einen neuen Offset-CT-Rekonstruktionsalgorithmus für einzigartige Scan-Geschwindigkeiten und Bildauflösungen.

 
21-04-2021

Nikon stellt die „Remote Control SDK"-Software vor, welche die Integration mehrerer NEXIV in die Produktionslinie ermöglicht

Nikon stellt die „Remote Control SDK

TOKYO- Die Nikon Corporation (Nikon) freut sich, die Veröffentlichung von „Remote Control SDK“ bekannt zu geben, einem Software Development Kit, welches mit der CNC-Videomesssystem-Reihe „NEXIV“ für die automatische Messsystemintegration kompatibel ist.

 
16-03-2021

Neues Röntgen-CT-System bietet eine einzigartige Kombination aus fünf innovativen Merkmalen für eine höhere Benutzerfreundlichkeit und längere Betriebszeit

Neues Röntgen-CT-System bietet eine einzigartige Kombination aus fünf innovativen Merkmalen für eine höhere Benutzerfreundlichkeit und längere Betriebszeit

Neues Röntgen-CT-System bietet eine einzigartige Kombination aus fünf innovativen Merkmalen für eine höhere Benutzerfreundlichkeit und längere Betriebszeit

 
30-11-2020

Automatische Leistungsprüfung von Röntgendetektoren

Automatische Leistungsprüfung von Röntgendetektoren

Nikon Metrologys neues Detektor-Evaluierungspaket nach ASTM E2737 bietet auf einzigartige Weise eine automatisierte Analyse von Bilddaten mit Leistungstrend-Analyse

 
23-11-2020

Neues Hochgeschwindigkeits- videomesssystem für die Qualitätskontrolle

Neues Hochgeschwindigkeits- videomesssystem für die Qualitätskontrolle

Nehmen Sie Präzision ernst mit dem neuen NEXIV VMZ-S 3020. Berührungsloses, hochleistungsfähiges Videomesssystem.

 
27-10-2020

Das APDIS Laser Radar

Das APDIS Laser Radar

Die Qualitätskontrolle in großvolumigen Anwendungen wird revolutioniert. Das APDIS Laser Radar-Prüfsystem von Nikon Metrology ist doppelt so schnell wie sein Vorgänger bei gleichbleibend hoher Genauigkeit.

 
03-10-2020

Fragen Sie unsere Experten – die NEXIV Edition

Fragen Sie unsere Experten – die NEXIV Edition

Nikon NEXIV bietet eine komplette Produktpalette, angefangen von Einsteiger-Tischgeräten bis hin zu Systemen, die extrem breite Arbeitsbereiche abdecken. Diese Baureihe wurde konzipiert, um anspruchsvolle Fertigungsanforderungen in der automatisierten Vermessung von mechanischen Bauteilen, elektronischen Geräten, Form- und Gussteilen und medizinischen Geräten zu erfüllen.

Wir sprachen mit unserem Nikon NEXIV Experten Paul Gough über die Erfahrungen, die er in seiner mehr als 13-jährigen Tätigkeit mit der NEXIV Baureihe gesammelt hat.

 
21-08-2020

Fragen Sie unsere Experten – die JCM-7000 REM Edition

Fragen Sie unsere Experten – die JCM-7000 REM Edition

Die europäische Partnerschaft von Nikon Metrology mit JEOL besteht seit mehr als zehn Jahren. Zusammen haben wir eine starke Beziehung aufgebaut, die dazu führte, dass das NeoScope ausschließlich von Nikon Metrology in Europa verkauft und unterstützt wird.

 
22-06-2020

Nikons neuer MCAx S- Messarm leitet die nächste Stufe der portablen Scanning-Präzision und Konnektivität ein

Nikons neuer MCAx S- Messarm leitet die nächste Stufe der portablen Scanning-Präzision und Konnektivität ein

Der neue, hochmoderne MCAx S-Gelenkmessarm von Nikon Metrology erweitert den ModelMaker H120 durch verbesserte Präzision, Zuverlässigkeit und Konnektivität. Diese perfekte Kombination ist die mobile Lösung für das handgeführte Laserscannen und bietet höchste Genauigkeit, Detailtreue und Produktivität – ideal für den Einsatz im Messlabor, in der Werkstattumgebung oder im Außenbereich.

 
19-05-2020

Wenzel und Nikon Metrology vereinbaren Vertriebspartnerschaft

Wenzel und Nikon Metrology vereinbaren Vertriebspartnerschaft

Die Vertriebsvereinbarung zwischen Nikon Metrology und WENZEL sieht vor, dass zwei der größten globalen Akteure im Bereich der Messtechnik eine neue Partnerschaft eingehen. Diese Vertriebspartnerschaft bietet den Kunden die ultimative Kombination aus innovativen Koordinatenmessgeräten (KMGs) mit der unübertroffenen Laserscan-Technologie von Nikon Metrology.

 
27-08-2019

Advantages of CMM-Manager software vs traditional digital readout

Advantages of CMM-Manager software vs traditional digital readout

Many inspection facilities have spent years collecting the variety of microscopy equipment and vision systems that are used on a daily basis. Often, that means a number of machines function with different levels of technology, and with different capabilities. One way to increase efficiency for facilities like these is to unify all equipment with one user-friendly inspection software, like Nikon Metrology's CMM-Manager.

 
09-07-2019

Seeing is believing: 2D and 3D X-ray technologies for nondestructive testing

Seeing is believing: 2D and 3D X-ray technologies for nondestructive testing

Download Herminso Villarraga-Gómez's latest white paper 'Seeing is believing: 2D and 3D X-ray technologies for nondestructive testing' on the use of X-ray technology for Nondestructive testing here.

 
13-06-2019

NEW: Nikon Metrology releases CMM-Manager version 3.9

NEW: Nikon Metrology releases CMM-Manager version 3.9

Nikon Metrology, market leader in optical measurement systems, releases CMM-Manager 3.9. This latest version allows CAD import up to 20 times faster, improves 3D scene and CAD display, and ISO GD&T in addition to existing ASME GD&T evaluations. There are numerous vision improvements for NEVIX and iNEXIV video measurement systems, and CAD import and rendering is improved by the use of multi-thread processing and GPU rendering.

 
08-05-2019

Measurement room of the future

Measurement room of the future

Nikon Metrology is proud to support the BMW Group’s body shop at Dingolfing. As Industry 4.0 introduces a new era of digitalisation, BMW has developed a new and innovative, fully automated inline measurement cell for quality control. Featuring the Laser Radar, the multiple measurement cell combines a whole range of industry leading measuring solutions for full geometric inspection of vehicle body parts.

 
01-05-2019

Delivering the ultimate industrial imaging solutions

Delivering the ultimate industrial imaging solutions

Nikon Metrology NV and Pixelink announce a new Strategic Partnership delivering a selection of high quality industrial microscopy cameras to fulfil the needs of mid-range customer requirements.

 
23-04-2019

Neue Konzepte für Fertigungsprozesse mit Qualität 4.0.

Neue Konzepte für Fertigungsprozesse mit Qualität 4.0.

Nikon Metrology bietet Herstellern eine neue Vision für eine effiziente, produktive und intelligente Fertigung. Das Ziel besteht darin, Herstellern die Produktion besserer Produkte zu geringeren Kosten zu ermöglichen, die Reaktion auf Nachfrageveränderungen zu beschleunigen sowie die Vorlaufzeiten zu verkürzen, um die Wettbewerbsfähigkeit insgesamt zu steigern. Auf der Control 2019 stellt Nikon Metrology sein gesamtes Produktportfolio vor: digitale, automatisierte und vernetzte Fertigungslösungen für die modernen und vielfältigen Anforderungen von Industrie 4.0.

 
11-04-2019

Frost & Sullivan forecasts Laser Radar to revolutionize automotive body-in-white inspection

Frost & Sullivan forecasts Laser Radar to revolutionize automotive body-in-white inspection

Following extensive primary research, key industry analyst Frost & Sullivan anticipates great opportunities for shop floor body-in-white inspection in Industry 4.0

 
29-03-2019

7D Kinematic Metrology has acquired the iGPS dynamic tracking business from Nikon Metrology

7D Kinematic Metrology has acquired the iGPS dynamic tracking business from Nikon Metrology

Leuven, March 29, 2019. Nikon Metrology announced today that Canadian based 7D Kinematic Metrology Inc, has acquired Nikon Metrology’s iGPS dynamic tracking business. The closing of the transaction is expected to take place on Mar 31, 2019.

 
20-02-2019

Nikon Metrology - Upcoming events - March & April

Nikon Metrology - Upcoming events - March & April

Over the next few months, Nikon Metrology is hosting and attending many events around the world. If you would like to experience the Nikon Metrology solutions with an interactive demonstration or discuss your applications, find your nearest location below and come along to meet the team.

 
14-02-2019

High voltage microfocus CT for inspection of dense & complex parts

High voltage microfocus CT for inspection of dense & complex parts

CT is accurate and reliable for measuring internal and external dimensions simultaneously, without destroying the part. The insight it provides through the additional fourth dimension of material density makes it the must-have tool for quality and production departments. High voltage microfocus CT offers the same capabilities for measuring large parts and penetrating dense materials. It opens new CT applications for turbine blades, aluminium castings and many other sizable parts.

 
06-02-2019

Nikon Metrology presents at iCT 2019

Nikon Metrology presents at iCT 2019

From 13-15th February, Nikon Metrology will present at iCT 2019 - the 9th International Conference on industrial Computed Tomography, in Padova, Italy.

 
16-01-2019

Focus 2019 further expands laser scanning capability

Focus 2019 further expands laser scanning capability

Nikon Metrology announces the release of Focus 2019. This latest version of Focus laser scanning software introduces new and improved features. These features include improved alignment workflow, advanced 3D graphics engine and extended GD&T functions, such as “Surface profile per unit” tolerance to identify local imperfections on surfaces and “Runout” tolerance, typically used on cylindrical features.

 
10-01-2019

The Evolution of Flashlights imaged using Nikon CT

The Evolution of Flashlights imaged using Nikon CT

X-ray CT Metrology Specialist, Herminso Villarraga-Gómez continues his annual themed X-ray images, with this depiction of the evolution of flashlights. The images obtained using a Nikon XT H 225 ST show the evolution from a 1900’s matchless fisheye flashlight, to a modern LED flashlight of today.

 
22-11-2018

Quality 4.0 in car body inspection

Quality 4.0 in car body inspection

High-end manufacturing has always required feedback of reliable measurements to adjust parameters precisely and keep components within tolerance. The better and more regular the data provided, the more tightly a production line can be controlled. Nikon’s Laser Radar technology - capable of providing fast, automated, accurate, absolute measurements - clears the way for faster feedback of quality information, leading to exceptional levels of accuracy, high manufacturing efficiency, reduced rework and less scrap.

 
17-10-2018

Nikons vielseitige Software macht 4D CT möglich

Nikons vielseitige Software macht 4D CT möglich

Die Inspect-X Software von Nikon Metrology ist insofern einzigartig, als dass sie neben der bedienerfreundlichen Oberfläche eine programmierbare Schnittstelle besitzt. Sie bietet die erforderliche Flexibilität für die Entwicklung maßgeschneiderter CT-Lösungen und die Integration von externer Analysesoftware und Hardware für Steuerungsfunktionen. Die Forscher des Henry Moseley Röntgeninstituts der University of Manchester haben die Möglichkeiten dieser Software genutzt, um die 4D CT für Laborexperimente zu implementieren. Könnten sich damit auch neue Möglichkeiten für industrielle Umgebungen eröffnen?

 
20-08-2018

Nikon introduces the CNC Video Measuring System "NEXIV VMZ-H3030"

Nikon introduces the CNC Video Measuring System

TOKYO-Nikon Corporation (Nikon) is pleased to announce the release of the CNC Video Measuring System, "NEXIV VMZ-H3030", suitable for measuring precision samples, such as semiconductor packages, electronic parts, and machined parts.

 
07-08-2018

PRESS RELEASE: CMM-Manager 3.8 for CMM, portable measuring and iNEXIV

PRESS RELEASE: CMM-Manager 3.8 for CMM, portable measuring and iNEXIV

Nikon Metrology, market leader in optical measurement systems, releases CMM-Manager version 3.8 on July 27, 2018. This latest release includes support for Nikon NEXIV VMZ-R, new Microsoft VBScript engine, several vision measurement enhancements, continued I++ enhancements including support for latest Renishaw UCC Server, new Alignment operations, and 64-bit build of CMM-Manager application.

 
02-08-2018

X-ray CT aids research into defect formation in AM parts

X-ray CT aids research into defect formation in AM parts

X-ray and CT technology is the leading method of quality assurance, but it is also being used for research into understanding how additive manufacturing process parameters influence defect formation in AM built parts. In his latest paper, Herminso Villarraga-Gómez explores the details.

 
31-07-2018

Nikon sponsors the 147th Open Championship at Carnoustie

Nikon sponsors the 147th Open Championship at Carnoustie

Nikon was an official sponsor for the 147th Open Championship at Carnoustie this past week (15th – 22nd July 2018). The eventual winner of The Open was Francesco Molinari, who secured his first career major title.

 
16-07-2018

See the light with CT

See the light with CT

Heavy-duty industrial lighting manufacturer, Nordic Lights deploys computed tomography to avoid expensive destructive testing, check for defects and to eliminate critical measurement errors caused by powder spraying for part preparation.

 
12-07-2018

Nikon erweitert die strategische Fokussierung auf Qualität 4.0

Nikon erweitert die strategische Fokussierung auf Qualität 4.0

Ein jüngstes Interview mit Tadashi Nakayama, dem Vizepräsidenten der Nikon-Unternehmensgruppe, bietet Einblick in die Strategie des Geschäftsbereichs Industrielle Messtechnik, dessen stellvertretender Geschäftsführer er ist. Insbesondere erläuterte er die strategische Fokussierung auf Qualität 4.0, welche die absolute Kontrolle über den Prozess vom Design bis zur Fertigung durch eine digitale, automatisierte und vernetzte Inspektion ermöglicht.

 
20-06-2018

Nikon’s global X-ray User Forum addresses CT in Industry 4.0

Nikon’s global X-ray User Forum addresses CT in Industry 4.0

Nikon Metrology and Nikon Corporation recently held its first global X-ray User Forum at Tring, UK. Customers from around the world were invited to share their implementation of CT technology and review applications and new practices consistent with the demands of Industry 4.0.

 
15-06-2018

Nikon Metrology sharpens its focus on automated car body inspection at automatica 2018

Nikon Metrology sharpens its focus on automated car body inspection at automatica 2018

From June 19th to June 22nd, Nikon Metrology will be exhibiting at the automatica tradeshow at Messe München, Germany. 

 
25-05-2018

Imaging Science Center installs highly versatile CT system

Imaging Science Center installs highly versatile CT system

Providing NDT and CT services for multiple industries, Nexus Metrology deals with a broad spectrum of applications. To handle the various rare and complex inquiries, the company relies on the Nikon Metrology XT H 225 ST, a versatile, non-destructive X-ray system delivering fast and insightful CT scanning. The adaptability of the system makes it a valuable tool for revealing defects, cracks and pores in many materials ranging from bones to cast parts.

 
15-05-2018

University of Manchester uses CT to scan moon rock

University of Manchester uses CT to scan moon rock

The Henry Moseley X-ray Imaging Facility (HMXIF) at the University of Manchester was established in 2003. With a total of 11 imaging systems including 3 Nikon systems, the facility takes on various industrial inspection tasks and research projects. A recent example, is this scan of the Northwest Africa 11444 moon rock, watch the video and find out more here.

 
18-04-2018

Nikon Metrology treibt qualität 4.0 voran

Nikon Metrology treibt qualität 4.0 voran

Auf der Control 2018 wird Nikon Metrology den Schwerpunkt vor allem auf die automatisierte Inspektion setzen. Angesichts des beschleunigten Wachstums des Industrie 4.0 Marktes muss die Qualitätskontrolle mit den jüngsten Entwicklungen Schritt halten. Die digitale, automatisierte und vernetzte Inspektion ermöglicht die absolute Kontrolle über den Prozess vom Design bis zur Fertigung – gleichbedeutend mit dem Begriff „Qualität 4.0“.

 
17-04-2018

Laser Radar-Messung auf einfache Art mit Metrolog X4 i-Robot

Laser Radar-Messung auf einfache Art mit Metrolog X4 i-Robot

Nikon Metrology und Metrologic Group werden auf der Control 2018 (in Stuttgart, vom Nikon Metrology und Metrologic Group werden auf der Control 2018 (in Stuttgart, vom 24. bis 27. April 2018) ihre 3D-Messlösung für die Fertigung vorstellen: das auf einem Roboter installierte Laser Radar in Verbindung mit der Steuerungs- und Automatisierungssoftware Metrolog X4 i-Robot. Die Software wird mit der Simulationssoftware Silma X4 i-Robot programmiert.

 
16-04-2018

Newsmagazine Volume 13: AVAILABLE NOW!

Newsmagazine Volume 13: AVAILABLE NOW!

The latest version of the Nikon Metrology Newsmagazine Volume 13 – is now available and can be downloaded here. In Newsmagazine Volume 13, read some of the most recent case stories from clients including University of Manchester, Stoneridge and Sintavia.

 
15-04-2018

Major advance in well bore analysis with Nikon CT inspection

Major advance in well bore analysis with Nikon CT inspection

Premier, COREX has been providing core analytical services to the oil and gas industry for more than 30 years. Within the last decade it has augmented its rock core investigations by sending samples for analysis approximately every week to Nikon Metrology’s centre of excellence for micro-focus computed tomography (micro-CT) in Tring, Hertfordshire.

 
04-04-2018

Imaging facility develops world leading research

Imaging facility develops world leading research

In the Henry Moseley X-ray Imaging Facility at The University of Manchester, the unique versatility of the Nikon CT systems enable its staff members to take on a great range of research and commercial projects. Nikon CT systems have been installed in the facility for almost 20 years, and they remain the workhorses of the facility today.

 
29-03-2018

Robotized Laser Radar Inspection Made Easy with Metrolog X4 i-Robot

Robotized Laser Radar Inspection Made Easy with Metrolog X4 i-Robot

Nikon Metrology and Metrologic Group will showcase at the 2018 Control trade fair (Stuttgart, 24-27 April 2018) their production line 3D metrology solution: the robot-mounted Laser Radar, fully controlled and automated by Metrolog X4 i-Robot software, and easily programmed with Silma X4 i-Robot simulation software.

 
28-03-2018

Cycle times cut by 50% with Nikon Metrology laser scanner

Cycle times cut by 50% with Nikon Metrology laser scanner

Czech based company, Lukov Plast, producer of plastic automotive components and sub-assemblies, reports considerably faster measurement cycles and feature measurements following installation of the Nikon Metrology LC15Dx laser scanner.

 
15-03-2018

Sintavia: „Gewusst wie“ mit Mikro-CT

Sintavia: „Gewusst wie“ mit Mikro-CT

Sintavia, ein additiv auf Metallbasis fertigendes Unternehmen, erweitert sein modernes Werk in Florida, USA, um ein CT-System von Nikon Metrology.

 
05-03-2018

New Scientist magazine shares the history of X-ray tubes

New Scientist magazine shares the history of X-ray tubes

A recent article in the New Scientist magazine takes a look at the CT scans of X-ray tubes, created by Herminso Villarraga-Gomez. Read below to find out what inspired Herminso to create these images and how they were taken.  

 
05-03-2018

NM3D Iberica introduces its Excellence Service Center

NM3D Iberica introduces its Excellence Service Center

NM3D IBERICA is a dimensional metrology global solutions provider, focused on the distribution of NIKON METROLOGY measuring solutions. Watch the video here as the Excellence Service Center is unveiled.

 
22-02-2018

Nikon Metrology & Roush Yates engines announce tech partnership

Nikon Metrology & Roush Yates engines announce tech partnership

MOORESVILLE, NC, February 22, 2018 – Roush Yates Engines and Nikon Metrology (Brighton, MI) announced a multi-year partnership program, demonstrating Roush Yates Engines’ commitment to partnering with the best-in-class companies. With over a 100 years of experience Nikon provides world-class precision equipment and metrology solutions to the manufacturing, aerospace, automotive and medical fields.

 
08-02-2018

ASF Metrology plant den Erwerb der Koordinatenmessgeräte-Sparte von Nikon Metrology

Löwen, 8. Februar 2018. Nikon Metrology gab heute bekannt, dass ASF Metrology die Übernahme der KMG-Sparte von Nikon Metrology plant. Die Transaktion soll in etwa zwei Monaten abgeschlossen sein.

 
31-01-2018

Automotive supplier identifies mystery error using Nikon laser scanner

Automotive supplier identifies mystery error using Nikon laser scanner

Stoneridge in Tallinn, Estonia, recently installed the Nikon ALTERA CMM with LC15Dx laser scanner in its test laboratory to take inspection of automotive components to the next level. The Laser scanner provides many advantages including complete visualisation of parts, non-contact measurement for delicate components and repeatable measurements.

 

 
11-01-2018

Nikon Metrology delivers 1,000th 160 kV X-ray source

Nikon Metrology delivers 1,000th 160 kV X-ray source

Since the manufacture of X-ray inspection machines began at Nikon Metrology’s Tring, UK factory in 1987, 1,000 Xi sources with an internal X-ray generator have been designed, produced and integrated into the company’s XT V systems, in addition to numerous other sources for the XT H range of X-ray and computed tomography machines.

 
26-12-2017

To customers using Nikon biological, stereo, measuring and industrial microscopes

The Nikon in-house inspection has reported that certain parts of the main bodies and accessories of our biological, stereo, measuring and industrial microscopes contain lead and hexavalent chromium which exceed the standard value specified in the RoHS Directive.

 

 

 
24-10-2017

Einladung zur „Messtechnik Mittagspause“ bei Nikon – Feiern Sie 100 Jahre Nikon mit uns

Einladung  zur „Messtechnik Mittagspause“ bei Nikon – Feiern Sie 100 Jahre Nikon mit uns

Am 23.11.2017 erwartet Sie ein üppiges Mittagsbuffet sowie Live-Demonstrationen aus den Bereichen 3D Koordinatenmesstechnik, portabler 3D Messtechnik, Mikroskopie und industrieller CT- und Röntgenprüfung. Verbringen Sie Ihre Mittagspause bei Nikon und nehmen Sie an einem aktiven Austausch unter Experten teil.

 
19-07-2017

Patientenspezifische Implantate zum erschwinglichen Preis

Patientenspezifische Implantate zum erschwinglichen Preis

Ortho Baltic, a manufacturer of patient-specific medical implants recently invested in additive manufacturing and CT inspection technology. It is vital for such components to be of outstanding quality, therefore an assured quality control system is integral to the company’s success.

 
12-05-2017

Der ModelMaker H120 bietet beispiellose Produktivität beim handgeführten Scannen

Der ModelMaker H120 bietet beispiellose Produktivität beim handgeführten Scannen

22 years since the inception of the ModelMaker product line, the cutting-edge ModelMaker H120 firmly pushes the ever-exacting boundaries of handheld laser scanning. Incorporating blue laser technology, ultra-fast frame rate, specially developed Nikon optics and the ability to measure the most challenging materials this represents the next generation of portable laser scanning. The H120 makes no compromises in addressing the market needs by efficiently delivering the most detailed and accurate data in a fraction of the time of competing technologies.

 
06-04-2017

Universal, flexible, profitable: measuring technology for sub-contract inspection

Universal, flexible, profitable: measuring technology for sub-contract inspection

Measuring prototypes and initial samples on commission is a field of work which requires high-precision measuring technology that can be deployed flexibly and universally for a wide range of measuring tasks. For DIMESS in Winnenden, laser scanners and coordinate measuring machines made by Nikon have proven to be perfect for the job.

 
22-03-2017

Precision meets productivity for aerospace component inspection.

Precision meets productivity for aerospace component inspection.

Already using a LK bridge CMM for measurement and geometric aerospace component inspection, LPO invests in a second Nikon CMM system to cope with the additional business due to the increase in production capacity.

 
21-03-2017

Nikon CMM assures IP class rating for thermal cameras

Nikon CMM assures IP class rating for thermal cameras

FLIR manufactures thermal imaging tools for use in various harsh conditions. The Technical department uses the ALTO CMM with CMM-Manager to check the quality of incoming components to guarantee they are as specified. The quality of the magnesium and plastic moulded components from sub-contractors is vital for use in the marine industry as the equipment FLIR produces must adhere to a stringent IP67 class rating, to approve its protection from water and dust.

 
10-01-2017

Team Penske and Nikon Metrology announce technical alliance

Team Penske and Nikon Metrology announce technical alliance

MOORESVILLE, N.C. (January 10, 2017) – Team Penske announced today that it has formed a technical alliance with Nikon Metrology, a market leader in metrology instrumentation and technological innovation.  The announcement expands upon an already existing relationship between the two companies.

 
17-11-2016

DTU Energy uses industrial CT to research the development of green energy solutions.

DTU Energy uses industrial CT to research the development of green energy solutions.

DTU uses a high flux Nikon Metrology CT system to non-destructively investigate energy materials such as batteries and fuel cells. The high energy 225 kV microfocus source penetrates dense battery, electrolysis cell and fuel cell samples in the search for suitable materials to develop sustainable, green energy systems.

 
08-11-2016

Pressings subcontractor replaces two CMMs with one Nikon VMA-4540

Pressings subcontractor replaces two CMMs with one Nikon VMA-4540

Second-tier supplier of light pressings and small assemblies to the automotive industry, Berck Limited, has invested in a iNEXIV VMA-4540 CNC video measuring machine fitted with tactile probing capability. Installed at the subcontractor’s factory in West Bromwich, UK, the multi-sensor machine has greatly speeded the inspection of 2D and 3D sheet metal components, improved measuring accuracy, and facilitated the production of detailed quality reports for customers. It also allows manufacturing processes to be optimised by providing detailed historical measurement data to be compared with current inspection results.

 
04-11-2016

Mindarika adopts microfocus CT to inspect automotive components

Mindarika adopts microfocus CT to inspect automotive components

Industry leader Mindarika based in India, designs, develops and manufactures all kinds of electrical switches and safety devices for automotive OEMs. Requiring a non-destructive inspection method, Mindarika install the Nikon Metrology XT H 225 ST to introduce non-destructive testing for an increased insight to maintain customer satisfaction and high levels of quality.